FTL Xpadder Controller Setup
Posted: Sat Dec 29, 2012 4:48 pm
I have recently connected my PC to a TV and wanted a controller setup for easy use so decided to make a Xpadder profile for FTL.
I have been working and fine tuning this for a while and have got it to a point that I’m happy playing FTL with a controller now, any constructive criticism welcome and hope this is useful to some of you.
Enjoy.
Here is the Xpadder Game Profile, to use it select and copy all of the Profile Data below and in Xpadder open the Game Profile menu and select Paste.
If you want the .xpaddercontroller file (controller profile) I created for this I have uploaded it to: http://www.mediafire.com/?onfwfa0edfsytmr though the Game Profile should work fine with any Xpadder XBOX 360 controller profile with all buttons, sticks, triggers enabled.
The Controller profile looks like this:

And finally here is the button mapping layout for reference.

I have been working and fine tuning this for a while and have got it to a point that I’m happy playing FTL with a controller now, any constructive criticism welcome and hope this is useful to some of you.
Enjoy.
Here is the Xpadder Game Profile, to use it select and copy all of the Profile Data below and in Xpadder open the Game Profile menu and select Paste.
Code: Select all
;--- Xpadder Profile Data ---
DataType=Profile
Version=2012.05.01
Name=FTL Profile (by Deltex)
Set1StickDeadZones=64,154
Set1StickDiagonalSizes=89,45
Set1Stick2Mode=FourWay
Set1Button1Slots=Left Mouse Button (1)
Set1Button2Slots=U
Set1Button3Slots=Right Mouse Button (2)
Set1Button4Slots=J
Set1Button5Slots=C
Set1Button6Slots=Q
Set1Button7Slots=O
Set1Button8Slots=Escape
Set1Button9Slots=T
Set1Button10Slots=R
Set1DPadUpSlots=2
Set1DPadRightSlots=3
Set1DPadDownSlots=4
Set1DPadLeftSlots=1
Set1Stick1UpSlots=Mouse Move Up
Set1Stick1UpMouseSpeed=38
Set1Stick1UpMouseMode=Cursor
Set1Stick1RightSlots=Mouse Move Right
Set1Stick1RightMouseSpeed=38
Set1Stick1RightMouseMode=Cursor
Set1Stick1DownSlots=Mouse Move Down
Set1Stick1DownMouseSpeed=38
Set1Stick1DownMouseMode=Cursor
Set1Stick1LeftSlots=Mouse Move Left
Set1Stick1LeftMouseSpeed=38
Set1Stick1LeftMouseMode=Cursor
Set1Stick2UpSlots=6
Set1Stick2RightSlots=7
Set1Stick2DownSlots=P
Set1Stick2LeftSlots=5
Set1TriggerLeftSlots=Space
Set1TriggerRightSlots=Left Control
The Controller profile looks like this:

And finally here is the button mapping layout for reference.
